ANTENNA UHF YAGI
13 ELEMENTS CH 28...69 WITH FERRITE BALUN
Specifications
AKUY13
Elements
13
Channels
UHF 28 … 69
Frequency Range
530 … 820 MHz
Antenna Gain
7 dBi ... 10 dBi
Reception / Usage
Digital
Front to Back Ratio
19 dB Typical
Impedance
75 Ω
Mounting Pole
25 mm to 38 mm
Balun Type
Integrated F Type Ferrite
AKUY13
Site Selection, Inspection and Safety
The section of the roof selected for placement of the antenna must be thoroughly inspected and confirmed to be structurally sound and in good
condition. Installers must be aware that this antenna installation may expose them to physical hazards like working at heights for example. Please
also be aware of the danger of live electrical cables either above or beneath the roof and building cladding. An approved earth leakage protection
safety device must be used when drilling into the roof structure.
If in doubt, please do not carry out this installation. Please consult a qualified antenna installation technician, who is a professional, endorsed and
has the right equipment to conduct the installation safely.
Assembly - Step 1
Unpack all items from the sealed gift
box and ensure all of the parts supplied
have been included.
Use the M4 x 40 screws along with the
M4 flat gasket, M4 flange nut to fix the
back reflectors to the centre boom.
AKUY13
INSTALLATION
INSTRUCTIONS
HORIZONTAL MOUNTING
Ensure the Ferrite F Type Balun is on the
underside of the antenna. The elements
should be on top of the boom to ensure
the antenna is not mounted upside down.
VERTICAL MOUNTING
Ensure the Ferrite F Type Balun is pointing
downwards.
IMPORTANT: MOUNT THE ANTENNA IN LINE OF SIGHT OF THE NEAREST TRANSMITTER
Specifications are subject to change without notice - Copyright © 2015 Jonsa Australia Pty Ltd. All Rights Reserved.
DISTRIBUTED BY:
JONSA AUSTRALIA PTY LTD
