MAGIC LIGHT EASEL
USER MANUAL
INTRODUCTION
Congratulations on the acquisition of Magic light easel!
The exterior might be slightly different from that shown in the instruction.
Please read the instruction carefully and save it before using your Magic light easel (MLE).
TECHNICAL PARAMETERS
Power:
14,4 W
Temperature regime:
+10°C
-
+45°C
Network voltage:
~ 220 V
Relative humidity in the room: 80 %
Voltage used by ML: = 12 V
Weight:
4 kg
Current flow:
0,6 A Measurements: 55,7 x 46,7 cm
Electrical frequency:
50 Hz
Remarks:
1. Easel is made in a way, that you could take out the glass from wooden part, rinse the glass with cool
water, mop it and put in again. It is forbidden to immerse wooden part in water or other fluids, to pour
fluids on it!
2. When lifting the easel, hold the wooden part from underneath.
3. The use of MLE, at a temperature close to limit, reduce radiated light flow and shortens operating
time of the product.
CONNECTION:
Before connecting make sure, that the device has no damages.
Needed parts in order the device would function: the MLE itself (A), 12 V adapter (B), remote control (C) and
electric power source. The easel consists from three parts: special glass (A.1), wooden base (A.2) and wooden
legs set with screws and spanner (A.3).
Open the package and take out the glass (A.1) from wooden base (A.2). Fix the legs (A.3) to the bottom of
the base (A.2) using screws and spanner. Then place the glass (A.1) to the wooden base (A.2) again.
