Jolly X-5 Coupe, Руководство пользователя

Страница: 14 / 30

10
Click on the main interface of the icon, numerical to view view Settings related information of lamps and
lanterns.Symbols such as the main interface appear “ “,the following error message indicates that there
might be a lamps and lanterns,can click to view and control information content to modify the lamps and
lanterns.
CODE
ERRO INFO CHECK MEASURMENT NOTE
E01 SpiFlashError Check the welding of memory IC
E02 Program Err 1 Check the welding of Chip
E03 Program Err 2 Check the welding of master IC EP3C
E04 MBDInit Error
E05 BD1Init Error
E06 BD2Init Error
E07 BD3Init Error
E12 BusErr1
E13 BusErr2
E14 SPDError Check the welding of master IC
E16 MFpga Error
E17 BD1 BUS Error
E18 BD2 BUS Error
E19 BD3 BUS Error
E21 Pan FB. Err
E23 Tilt FB. Err
E22 Pan Zero Err
E24 Tilt Zero Err
E25 Prism Err1
E26 Prism Err2
E27 Prism RtErr1
E28 Prism RtErr2
E29 R.Gobo Err1
E30 R.Gobo Err2
E31 Zomm Err
E32 Focus Err
E33 St.Gobo Err
E34 Cyan Err
E35 Magenta Err
E36 Yellow Err
E37 B.Fan1 Error
E38 B.Fan2 Error
E39 B.Fan3 Error
E40 L.Fan1 Error
E41 L.Fan2 Error
E42 L.Fan3 Error
E43 L.Fan4 Error
E44 GOBO Fan Error Check the fan of head GOBO
Check the communication signal 485& 485 chip & memory IC
Check the fan of head
Check cable of sensor, distance and location of ,magnets and
sensor
Check the light coupling line, optical coupling switch and a
plate of the relative position measurement
RESET
ERROR
Check if the blowing machine of lamp holder is working
Check if the fan(80) of the lamp holder is working
Check the communication signal& welding of communication
chip
Check main cable ABAB（485） chip