11
en
Replace the suction aggregate's exhaust air filter
t
Take out the motor protection
filter and the odor filter out of the
filter grip.
Caution:
The foam may not be dried in the dryer!
t
Clean (by hand) or replace the
motor protection filter.
Let the motor safety filter dry
completely before you mount it.
t
Place the motor protection filter
and the odor filter into the filter
grip.
t
Push the filter grip into the
designated guiding.
t
Lock the lid in place and close it.
The lid of the suction aggragate
must be locked in place.
Caution:
Turn off the machine (main switch and plug), while working on the machine!
Never use machine without a Filter!
Check the outlet electronical-suction brush regularly for dirt and replace it if necessary.
t
Press down the vice action latch
and remove the exhaust air lid.
t
Pull out the exhaust grid.
