Johnson Espresso, Инструкция по эксплуатации, Страница: 14 / 16

14
How to operate to froth milk
Step 1 : Repeat the above procedure 1
，
2.
Step 2 : Press the Steam Button (R);
the Steam Light (Q) will be flashing.
Now slight water will be coming
out of the Steam duct (D).
Step 3 : During period of awaiting steam
generation, prepare the fresh milk.
Firstly tip the appropriate fresh
milk to a container.
When the Coffee Light (O) comes
out, the machine is now ready for
frothing milk.
Step 4 : Press the Steam Switch (S) ON,
wait for several seconds to let the
water accumulated in the Steam
duct (D) run out for cleaning
purpose.
Then press down the Steam Switch
(T) OFF to terminate the cleaning
process.
Step 5 : Rotate Steam duct (D) outwards
closing to the right corner.
Then move the container to the
Steam duct (D) and locate this
Steam duct (D) in the middle of this
container, and immerse the bottom
end of the duct into the fresh milk.
(Fig.4).
Step 6 : Press down the Steam Switch (S)
ON to commence the frothing.
[ ATTENTION : When milk foam
starts to create, operator should
lower down somewhat the container
to attain the favorable frothing
effects and avoid any foam likely
from overflowing out of the mouth
of the container].
After achieving the expected
frothing, press down the Steam
Switch (T) OFF to turn off the steam.
Step 7 : Rotate the Steam duct (D) inwards,
and repeat the above procedure 4
for cleaning purpose.
Step 8 : Press Power Button (N)
to disconnect the power, empty
Anti drip.
How to operate to hot water
Step 1 : Repeat the above procedure 1
，
2.
Step 2 : Put a cup under the steam duct.
Step 3 : Press down the steam Switch (S)
ON, and press down Brewing
Button (P), the pump will work.
Then the steam will come our from
the steam duct into the cup at first,
then the hot water will come from
the steam duct into cup.
Step 4 : The hot water will come out until
the water in water tank is out if
the steam switch and the Brewing
Button are in ON position.
if you want terminate the hot
water, just put either the Steam
Switch or the Brewing Button in OFF
position.
ATTENTION :
1 , During the operation,
the temperature of steam duct and
base of boiler is very high; don’t
touch them with your hand.
2
,
To get optimal result, before
every usage, please fit the empty
funnel bracket into the unit
properly, and use only water in the
first cycle, then throw away the
water in the cup.