
13
Step 2
: Plug Power Cord to the power and
press down Power Button (N), then
the Power Light (M) & the Coffee
Light (O) will come on simultaneously.
Subsequently press down Brewing
Button (P) to pump water from
Water Tank (B) to Boiler.
Once water is noticed to run out of
the single-direction valve (which
implies that Boiler has been full of
water), press down Brewing Button
(P) once again.
Step 3
: Using coffee powder.
Please note that there are two
marks in the filter, the below mark
is 7g coffee Powder mark, the
above one is 14g.
Prepare the coffee powder and fit
the appropriate amount into the
Filter (K).
Tamp the coffee powder with
Presser (L).
When using 7g coffee powder,
first put 7g Coffee powder in the
bottom of filter, then place the
gasket on the surface of the coffee
powder.
The gasket is not used when using
14g coffee powder.
Using pod, first put the pod in the
bottom of filter, then place the
gasket on the surface of the coffee
pod.
The coffee light (O) will go off once
temperature reaches certain value,
now please insert the Valve cover
(J) and Filter (k) into the Funnel
Bracket (I) in the order indicated
(Fig.1).
(
NOTE
: There are three protrusions
in the edge of the filter and three
gaps in the edge of Funnel bracket,
please let protrusion match gap so
to have them fitted well, and then
fit the Funnel bracket (I) back to the
unit and rotate counter-clockwise
for steady fitting (Fig.2).
ATTENTION
: Once happen
unfavorable fitting, repeat the
fitting operation once more.
Usually, the position under the
mark▼ is the place which the
funnel bracket is clocked in, the
section is the scope which the
Funnel bracket fall in when fitting
ready.
Put the Espresso Cups (100ml) in
the middle of the Anti drip tray (E).
Step 4
: Press down Brewing Button (P)
to commence brewing coffee.
To stop and continue the brewing,
just press down the Brewing Button
(P) again.
Once the Coffee Light (O) comes
on, it alerts the operator the water
temperature has become lower and
unsuitable for the brewing any
longer, now please press down
Brewing Button (P) to stop the
brewing.
[
ATTENTION
: Commence to
thbrew coffee only after the Coffee
Light (O) is out, and stop the
brewing once the Coffee Light (O)
is on.
Step 5
: Remove the Espresso cup and
slowly remove the Funnel bracket
(I), which could gradually reduce
the pressure of the Filter (K) and
avoid spilling coffee everywhere.
Finally clean residues in the Filter
(K) and the Anti drip tray (E)
completely.
Boiler
Singldirection valve