WWW.JOHNSONSYSTEMS.COM
16
Settings Screen
1. DMX Channel Setup
2. Aux Switch Input
3. Schedule
4. Audio
5. Date/Time
6. Bluetooth (Future)
7. Motion Detection
8. Info
9. Sync And Lock
10. Password
11. Backlight
12. Preset Enable/Disable
Status LED's
Green – Room Linker Combiner
Blue – Bluetooth (Future)
Yellow – DMX In
Status LED's
• INITIAL SETUP AND CONFIGURATION
• Pressing the SETTINGS icon (4 above) right of the screen will
access the SETTINGS menu where configuration and customization
of each PWS can be performed.
Each icon will access a screen menu page permitting customization of each
PWS. It is recommended that the PWS be programmed in the following
order:
Essential Configuration
1. PASSWORD - Security enable various PWS functions through two
levels of password permission access. See PASSWORD in the
manual for factory default codes and instructions to change.
2. DMX CHANNEL SETUP - Permits the selection (unmasking) of
specific DMX channels that the PWS will output. PWS are shipped
from the factory fully masked with no channels selected. Each
channel can be assigned as a dimmer (DIM), non-dim (ND) or task
light (TASK).
3. PRESET ENABLE/DISABLE - PWS are shipped defaulted with the
first 10 presets enabled. Up to 70 presets are available in 7 different
colors. Enable the desired number of presets.
4. DATE/TIME - Set the date and time in various display formats.
5. SYNC AND LOCK - Synchronize any Secondary PWS connected
to the room Main PWS. Relevant data will be shared from the Main
to the Secondary PWS (maximum 14 Secondary PWS per room).
Optional Configuration
6. AUX SWITCH INPUT - Select the type of contact input and the
preset choice(s) upon input activation and/or disable.
7. SCHEDULE - Selection of up to 70 presets for automatic activation
via the onboard Real Time Clock (RTC). One minute increments
24/7/365.
8. AUDIO - Selection of audio type and volume.
9. MOTION DETECTION - Sensitivity selection of the proximity sensor
for auto recognition.
10. BACKLIGHT - Sensitivity selection of the ambient light sensor for
desired level of station illumination.
11. BLUETOOTH (FUTURE) - Available 1Q 2021.
12. INFO - Critical system information as displayed on next page (top
right).