Johnson Controls YORK YK Series страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 66

background image

Miscellaneous packaging of four vibration isolation pads, or optional spring isolators. K7 units are

shipped with eight vibration isolation pads.

Form 3 - Driveline seperated from shells

The unit is shipped as two major assemblies:

•

Chiller unit

•

Compressor and motor

The unit is first factory assembled, refrigerant piped, wired and leak tested, then dismantled for

shipment. The evaporator and condenser assembly is not skidded.
All wiring integral with the compressor is left on it, and all conduit is left on the shell. All openings

on the compressor and shell are closed and charged with dry nitrogen to a pressure of 2 to 3 psig

(115 to 122 kPa).
Miscellaneous packaging of control center, tubing, water temperature controls, wiring, isolators,

and similar items. The unit is shipped with a nitrogen charge. Refrigerant charge shipped

seperately.

Note:

Units shipped dismantled must be re-assembled by, or under the supervision of, a

Johnson Controls representative. Refer to

Installation and Reassembly - Unit (Form 160.75-N3)

.

Form 7 - Split shells

The unit is shipped as three major assemblies:

•

Compressor and motor

•

Evaporator and condenser, shells are split

The unit is first factory assembled, refrigerant piped, wired and leak tested, then dismantled for

shipment.
The compressor and motor assembly is removed from the shells and skidded.
Evaporator and condenser shells are separated at tube sheets and are not skidded. Refrigerant

lines between the shells are flanged and capped, requiring no welding.
All wiring integral with compressor is left on it, and all conduit is left on shell. All wiring harnesses

on the shells are removed. All openings on the compressor and the shell are closed and charged

with dry nitrogen to a pressure of 2 to 3 psig (115 to 122 kPa).
Miscellaneous packaging of control center, tubing, water temperature controls, wiring, isolators,

and similar items. The unit is shipped with a nitrogen charge. Refrigerant charge shipped

seperately.

Note:

Units shipped dismantled must be re-assembled by, or under the supervision of, a

Johnson Controls representative. Refer to

Installation and Reassembly - Unit (Form 160.75-N3)

.

Form 9 - Unit separate from variable speed drive

The unit is shipped as two major assemblies:

•

Chiller unit

•

Variable speed drive

The unit is first factory assembled, refrigerant piped, wired and leak tested, then dismantled for

shipment. Evaporatora and condenser assembly is not skidded.
All wiring integral with compressor is left on it, and all conduit is left on shell. All openings on

compressor, and shell are closed and charged with dry nitrogen to a pressure of 2 to 3 psig (115 to

122 kPa).

Model YK (Style G) Centrifugal Liquid Chiller

10

«
...
8
9
10
11
12
...
»

Содержание YORK YK Series



































































Отзывы:

Нет отзывов

Похожие инструкции для YORK YK Series

Бренд: Echo Страницы: 18

Merry Tiller Titan

Бренд: WOLSELEY Страницы: 10

Бренд: MAXA Страницы: 35

Бренд: Skope Страницы: 58

Бренд: EarthQuake Страницы: 28

Бренд: Scheppach Страницы: 56

Бренд: Harbour Страницы: 2

Бренд: Mantis Страницы: 24

Бренд: Mantis Страницы: 26

Бренд: Mantis Страницы: 26

Бренд: Garland Страницы: 172

Бренд: Garland Страницы: 136

Icemaster G20.1

Бренд: KegLand Страницы: 8

PE-AVE 36 Li Basic

Бренд: Pattfield Ergo Tools Страницы: 128

Бренд: Echo Страницы: 27

Бренд: York Страницы: 166

OM-NET2-1102-Acson

Бренд: Acson Страницы: 28

Бренд: Catler Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды