General chiller-heater information and safety
Introduction
YORK YHAU-CGN/H-CXR(M) absorption chiller-heaters are manufactured to the highest design and
construction standards to ensure high performance, reliability, and adaptability to all types of air
conditioning installations.
This chiller-heater is for air conditioning or cooling a manufacturing process. Use this chiller-heater
after installing the chilled/hot water pump, cooling water pump, cooling tower, valves, strainers,
pressure gauges, thermometers, or other relevant pumps and gauges, according to the water
quality information contained in
About this manual
This manual and any other document supplied with the unit are the property of Johnson Controls
which reserves all rights. This manual may not be reproduced, in whole or in part, without prior
written authorization from an authorized Johnson Controls representative.
In addition, this manual:
• Should be read thoroughly before attempting to operate or service the unit.
• Includes suggested best working practices and procedures, which are issued for guidance only,
and they do not take precedence over the stated individual responsibility and/or local safety
regulations.
• Contains all the information required for correct installation and commissioning of the unit,
together with operating and maintenance instructions.
• Contains detailed procedures, including installation, commissioning, and maintenance tasks that
must be performed by suitably trained and qualified personnel.
• The manufacturer will not be liable for any injury or damage caused by incorrect installation,
commissioning, operation, or maintenance resulting from a failure to follow the procedures and
instructions detailed in this manual.
Model YHAU-CGN/H-CXR(M)Double Effect Direct Fired Small Absorption Chiller-Heater
8