Chapter 4.0 Setting the Alarm System
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. Message LED
7. Status LEDs
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. LED
Note:
The Panic feature has not been evaluated by UL. All wireless key buttons are
programmable. Verify the functions assigned to each key with your installer. When using
compatible wireless keys there is one bell squawk for setting and two bell squawks for
unsetting.
4.9 Setting the System with a 2-Way Wireless Key
If configured, the PowerSeries Pro system can be set using the wireless keys provided with
your alarm system. To Set the system with a 2-way wireless key, press the desired Setting
mode button when the system Ready indicator is on.
4.10 Setting the System with a Proximity Tag
Proximity tags can be used to set/unset the system or to perform a programmed function (e.g.
used in place of entering an access code or to unlock a storage room door).
To Set the system with a proximity tag
•Present your proximity tag to a keypad with a proximity sensor when the system Ready
indicator is on.
•If configured by your installer, enter your access code.
Note:
When arming with a proximity tag, the system sets in Away mode if you exit the
premises. The system arms in Stay mode if a motion sensor is installed and you don't exit the
premises.
- 11 -
