Attaching the EG4 Fixed Dome camera to the junction box
(continued)
C. Place the camera cable (1) (Figure 5) through the hole in the center of the
adaptor plates.
D. Hold the camera base (2) (Figure 5) up to the adaptor plates and align the
three holes on the camera base with the three holes on the adaptor plates.
E. Insert the three M4 x 0.7P x 10L screws (3) (Figure 5) into the three holes
and securely attach the camera base to the adaptor plates.
Figure 5
F. Insert the camera cable through the waterproof rubber seal (1) (Figure 6)
and holding bracket plate (2) (Figure 6) and securely attach the bracket
plate to the camera base with the three M2 x 6.5mm BK screws.
Security
Q
uick
S
tart
G
uide
(8200-1929-07_A0)
Essentials Gen4 Fixed & Varifocal Dome Cameras Junction Box
(IBJB-E-IS75-40)
In the box
1 x Junction box
1 x Essential Adapter plate
6 x TP4 Screw anchors
6 x TP4 Tapping screws
1 x Mounting template
1 x Waterproof rubber sealing
1 x Rubber grommet
1 x Torx wrench
1 x Holding bracket plate
3 x M2 x 6.5mm BK screws
3 x M4 x 0.7P x 10L screws
4 x M4 x0.7P x 8L SUS 304 screws
Installation tools
Drill & Philips Head screwdrivers
Wire cutters & Hammer
Figure 1: Product Overview (Unit: mm)
Figure 1
Figure 2: Product Overview (Unit: mm)
Figure 2
Mounting the junction box to a surface
A. Place the mounting template on the surface that you want to attach the
junction box and drill six holes as per the instructions on the template.
B. Use a hammer to insert the six screw anchors (1) (Figure 3) into the six
holes.
C. Hold the junction box (2) (Figure 3) up to the surface and align the six holes
on the junction box with the six holes on the surface.
D. Insert the six TP4 tapping screws (3) (Figure 3) into the six holes and
securely attach the junction box to the surface.
Figure 3
Attaching the camera adaptor plate to the junction box adaptor plate
A. Hold the Essentials adaptor plate (2) (Figure 4) up to the junction box
adaptor plate (1) (Figure 4) and align the four holes on both plates.
B. Insert the four M4 x 0.7 x 8L SUS 304 screws into the four holes and
securely attach them both together.
Figure 4
Attaching the EG4 Fixed Dome camera to the junction box
A.
Mount the junction box to a surface
as per steps A to D in that procedure.
B.
Attach the camera adaptor plate to the junction box adaptor plate
as per
steps A and B in that procedure.
Attaching the EG4 Fixed Dome camera to the junction box
(continued)
Figure 6
G. Place the camera cable through the hole in the junction box
or
through the
cable side entry hole on the side of the junction box.
H. Align the three holes on the camera base with the three holes on the junction
box and insert the three T20 screws into the three holes and securely attach
the camera base to the junction box.
I.
Hold the camera dome (1) (Figure 7) up to the camera base and align the
three holes on the dome with the three holes on the camera base, insert the
three dome screws into the three holes and securely attach the dome to the
camera base.
