background image

Published in U.S.A.

www.johnsoncontrols.com

TEC2145-4 N2 Networked Thermostat Controller with Single Proportional Output and One-Speed Fan

Control Installation Instructions

 17

Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.

All other marks herein are the marks of their respective owners. © 2010 Johnson Controls, Inc.

Building Efficiency

507 E. Michigan Street, Milwaukee, WI  53202

Technical Specifications   

TEC2145-4 N2 Networked Thermostat Controller with Single Proportional Output and
One-Speed Fan Control

Power Requirements

19 to 30 VAC, 50/60 Hz, 2 VA (Terminals 4 and 5) at 24 VAC Nominal, Class 2 or 
Safety Extra-Low Voltage (SELV)

Analog Output Rating

0 to 10 VDC into 2k ohm Resistance (Minimum)

Fan Relay Output Rating

19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush, Class 2 or SELV

Auxiliary 
Output Rating

Triac Output

19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush

Analog Inputs

Resistive Inputs (RS and UI3) for 10k ohm Johnson Controls Type II Negative Temperature 
Coefficient (NTC) Thermistor Sensors

Binary Inputs

Voltage-Free Contacts Across Terminal Scom to Terminals BI1, BI2, or UI3

Wire Size

18 AWG (1.0 mm Diameter) Maximum, 22 AWG (0.6 mm Diameter) Recommended

Thermostat Controller 
Measurement Range

-40.0°F/-40.0°C to 122.0°F/50.0°C

Sensor Type

Local 10k ohm Johnson Controls Type II Negative Temperature Coefficient (NTC) 
Thermistor Sensor

Resolution

±0.2F°/±0.1C°

Control Accuracy

±0.9F°/±0.5C° at 70.0°F/21.0°C Typical Calibrated

Temperature 
Range

Backlit 
Display

-40.0°F/-40.0°C to 122.0°F/50.0°C in 0.5° Increments

Heating 
Control

40.0°F/4.5°C to 90.0°F/32.0°C

Cooling 
Control

54.0°F/12.0°C to 100.0°F/38.0°C

Default Minimum Deadband

2F°/1C° between Heating and Cooling

Ambient 
Conditions

Operating

32 to 122°F (0 to 50°C); 95% RH Maximum, Noncondensing

Storage

-22 to 122°F (-30 to 50°C); 95% RH Maximum, Noncondensing

Compliance

United States

UL Listed, File E27734, CCN XAPX, 
Under UL 873, Temperature Indicating and Regulating Equipment

FCC Compliant to CFR 47, Part 15, Subpart B, Class A

Canada

UL Listed, File E27734, CCN XAPX7, 
Under CAN/CSA C22.2 No. 24, Temperature Indicating and Regulating Equipment

Industry Canada, ICES-003

Europe

CE Mark, EMC Directive 2004/108/EC

Australia and 
New Zealand

C-Tick Mark, Australia/NZ Emissions Compliant 

Shipping Weight

0.75 lb (0.34 kg)

The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these 
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or 
misuse of its products.

Содержание TEC2145-4


















Отзывы: