Johnson Controls PENN Connected PC10, Инструкция по установке и вводу в эксплуатацию

Страница: 5 / 20

Introduction
The PENN Connected PC10 Remote Wireless Monitoring System provides automated temperature
monitoring solutions for the food retail industry.
Examples of equipment for monitoring
The following list provides examples of typical refrigeration equipment that the PC10 system can
monitor:
• Wall chillers and freezers
• Well freezers
• Plug-in refrigerators and freezers
• Chiller and freezer rooms and doors
Hardware requirements
Table 1: Hardware requirements
Product code Description Quantity Region
RMZ-1214-E10 Single-probe internal temperature sensor
RMZ1214E11-NT1 Cable lenth: 0.9 m NTC
RMZ1214E11-NT3
Dual-probe internal and external
temperature sensor
Cable length: 2.8 m NTC
RMZ1214E20 Dual-probe humidity and internal temperature sensor
1 for every
refrigeration unit
RMZ1214E61-DS1 Magnetic external door sensor with reed contact switch 1 for every chiller
or freezer room
door
All
RMZ1214R10-UK UK and Ireland
RMZ1214R10-EU Europe
RMZ1214R10-US
Repeater to extend the wireless network range 1 for every 15
temperature
sensors
North America
RMZ1218C10-UK UK and Ireland
RMZ1218C10-EU Europe
RMZ1218C10-US
Plug-in Ethernet gateway for ZigBee
®
wireless sensors
North America
RMZ1216C20-UK Ireland and UK
RMZ1216C20-EU
GSM and GPRS gateway for ZigBee wireless sensors
Europe
RMZ1218C40-UK UK and Ireland
RMZ1218C40-EU Europe
RMZ1218C40-US
LTE 4G gateway for ZigBee wireless sensors
1 for every site
North America
Software requirements
• Android
®
device, minimum version 4.4.4.
• PENN Commissioner app available from the Google Play
®
store: https://play.google.com/
store/apps/details?id=ie.zeto.commissioner .
Installation sequence
Install the hardware in the following sequence only: gateway, repeaters, temperature, and door
sensors.
Guidelines for magnet usage
Observe the following guidelines when you use the magnet:
5 PENN Connected PC10 Install and Commissioning Guide