Johnson Controls PENN ACT2, Технический бюллетень

Страница: 57 / 116

Programming the ACT2 Controller Using the Maestro Software Interface
57
HVAC Setup Screens
Unit #3 HVAC
Cool2
Cool1
Cool3
Cool4
Cool5
Cool6
Recl1
Board Point Wired Override Overr
In
In
None
None
None
None
In
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
Normal
Normal
Normal
Normal
Normal
Normal
Normal
2
1
0
0
0
0
3
0
0
0
0
0
0
0
Setup
Status
Setpoints
Night setpoints
Zone #1
2nd Speed Fan Fan operation
Zone name:
On cool #:
On reclaim #:
On auxillary #:
2
1
1
Auto
Sales AC
#Cool:
Outputs
#Dehum:
#Reclaim:
2
1
2
#Auxillary:
1
#Fans:
2
Prev Next Undo
Outputs: The first column in
the outputs section defines
how many stages of cooling,
dehumidification, heat
reclaim, auxiliary heat
fan speeds available . The
table to the right then defines
each of these stages.
there
are, as well as the number of
2nd Speed Fan: This
section defines which stage
of cooling, reclaim heat, and
auxiliary heat activate the
second fan speed.
Zone Name: This assigns a name to the zone shown.
Zone names can be up to eight characters long.
Prev: Clicking on this
button will display the
previous HVAC zone
setup screen. (The zone
number is displayed to
the left of this button, and
the zone name is
displayed in the box
above.)
Next: Clicking
on this button
will display the
next HVAC zone
setup screen.
Undo: This
button will return
this screen to its
original values
for this session.
Board and Point:
Wired:
Override:
Override Time:
These indicate the board and point that
the input or output is wired to.
This tells the software if the input or output is wired
Normally Open (N.O.) or Normally Closed (N.C.).
This column is used to override the output to the
left. Outputs can be overridden as On Fixed, Off Fixed, On
Timed or Off Timed.
This column is used to enter the duration
of override when On Timed or Off Timed override is used.
Figure 53: HVAC Setup Parameters