User Manual: NEO System
31
Rev.0.3
a)
Emergency Microphone
On special occasions, the emergency microphone can be used to make announcements
in one or more zones in PA mode. Once the audio source routing is concluded, use the
PTT button on the microphone to make the announcement.
b)
Pre-Recorded Messages
From this menu one of the two pre-recorded message player sources, integrated in the
equipment, can be selected. To play the message, once the routing a message player is
done, the pre-recorded message window in the advanced menu must be accessed (see
and play the selected message.
c)
Selection Indicator
When the audio source has been selected, a blue band selection within the source button
will appear.
d)
De-route Audio Source
To clear the current assignment of an audio source to a zone / zones, select the source
marked "X". New routing is done automatically if a new source is assigned to a zone that
previously had an audio source routed.
Once complete, to cancel, press the "BACK" button. To confirm, press the "OK" button,
this will access the zone selection menu where the zones can be assigned a sound
source (see 2.2.7).
NOTE: When the ACSI bus is being used (see 4.2), audio source number 5 will change into a
microphone icon. This source will also be shown as unavailable.
NOTE: When the zone selection is for one of the pre-recorded message players or the EMIC,
the selection will be cleared when performing a new selection. When the selection if for any of
the other audio sources, the selection will be cumulative, meaning the zones not affected by the
selection will keep its audio routing.
3.5.3 Advanced Options
The equipment/system has advanced adjustment options. To access these options, from the PA
menu, click on the "ADVANCED" button. User control access level 3 (see 2.3
will be displayed.
To return, press the "BACK" button. Upon successful complete of the access control, the level
of access authorization will change to "Level 3" and the menu, which contains the options:
Figure 34 - Advanced Options Menu