User Manual: NEO System
13
Rev.0.3
Access control can be set in each of the levels. It is possible to choose from confirmation mode,
or access via 4-digit passcode with the configuration application.
Figure 5 - Types of Control Access Windows
2.3.1 Access Level 1
Access level 1 corresponds to the general user profile, or users with a general responsibility for
security supervision, which may initially respond to an emergency status, or failure.
2.3.2 Access Level 2
Access level 2 corresponds to a security manager profile who has specific training to operate
the equipment / system in the states of "PA", "Emergency", "Failure message" and "Disarmed".
2.3.3 Access level 3
Access level 3 corresponds to the administrator profile, who has specific training to modify the
system configuration and perform the maintenance, according to the instructions and
information presented in this manual.
2.4 Inputs and Outputs
Figure 6 - Inputs and Outputs
This chapter describes the rear connectors of the NEO series equipment. Depending on the
model, the equipment will or will not include some of the types described in this section and
quantity may vary.