3. Hang the network engine on the DIN rail hooks on the back of the network engine.
Press the DIN clips back into position to secure the unit on the DIN rails.
Figure 5: Required orientations for Network Engine wall mount applications
To remove the network engine from the DIN rails:
1. Snap the DIN clips on the bottom of the network engine to the outward position.
2. Lift the network engine off the DIN rails.
Enclosure mount
To mount the network engine in an enclosure:
1. Mount the enclosure in accordance with the manufacturer’s instructions.
2. Mount the network engine in the enclosure following the guidelines in the
sections of this document.
NAE55/NIE55 Installation Guide
6
