Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 7 / 54

7 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
Section 1 JWS-3 Features
1.1 Product Description
The JWS-3 is a web-based device that acts as an HTML server that allows remote viewing
of the NFN network (this includes high speed NFN networks) via the Internet or an
Intranet. With the JWS-3 interface, the user can view the history of a fire alarm control
panel (FACP), event status, device properties, and other information based on access
permissions defined by the system administrator. All data available on the JWS-3 is a
“snapshot” of the data on the NFN network at the time the browser requested the
information. The JWS-3 communicates to NFN network version 5.0 and later. The JWS-3
interfaces to the Internet/Intranet using an IP-based wire Ethernet connection. The JWS-3
can also be used as web-based communication between the NFN network and VeriFire
Tools. Refer to
Appendix A, “JWS-3 Compatible Node Types”, on page 47 for supported
panels and annunciators.
1.1.1 JWS-3 Features
These are some of the features of the JWS-3.
• Ability to view NFN network nodes, system statuses, and properties remotely using the
Internet or Intranet.
• Compatible with NFN network version 5.0 and above.
• One JWS-3 supports multiple users.
• Standard IP over Ethernet connection.
• Up to 128 user accounts are supported.
• Built-in password security and user access record
• Supports Microsoft Internet Explorer 6.0 and above.
• Intuitive web browser user interface.
• Sends up to 50 E-mails in response to any system event.