IOM2710 and IOM3710 Input/Output Modules Installation Instructions
9
Technical Specifications
AP-TBK4SA-0
Replacement MS/TP SA Bus Terminal, 4 Position Connector, Brown, Bulk Pack
AP-TBK4FC-0
Replacement MS/TP FC Bus Terminal, 4 Position Connector, Blue, Bulk Pack
AP-TBK3PW-0
Replacement Power Terminal, 3 Position Connector, Gray, Bulk Pack
MS-BTCVT-1
Wireless Commissioning Converter, with Bluetooth technology
MS-BTCVTCBL-700
Cable replacement Set for the MS-BTCVT-1 or the NS-ATV7003-0; includes one 5-foot
retractable cable.
Table 5: FEC/IOM Accessories (Order Separately) (Part 2 of 2)
Product Code
Number
Description
IOM2710 and IOM3710 Input/Output Modules (Part 1 of 2)
Product Code Numbers
MS-IOM2710-0
MS-IOM3710-0
Supply Voltage
20-30 VAC at 50 or 60 Hz, Class 2 or Safety Extra Low Voltage (SELV)
Power Consumption
10 VA typical, 14 VA maximum plus all BO and Configurable Output loads
Ambient Conditions
Operating:
0 to 50°C (32 to 122°F); 10 to 90% RH noncondensing
Storage:
-40 to 70°C (-40 to 158°F); 10 to 90% RH noncondensing
Terminations
Screw terminals, 3-Position Screw Terminal Pluggable Blocks, 4-Position Screw Terminal
Pluggable Blocks
Controller Addressing
DIP switch set (4-127). Addresses 1-3, 128-255 are reserved.
Communications Bus
BACnet® MS/TP; 3-wire FC Bus between the NAE/NCE and other devices. 4-wire SA Bus
when used as expansion to FEC.
1
Analog Input/Analog Output
Resolution and Accuracy
Analog Input:
16-bit resolution
Analog Output:
16-bit resolution and ±200 mV in 0-10 VDC applications
Mounting
On flat surface with screws on three mounting clips or a single 35 mm DIN rail
Dimensions
(Height x Width x Depth)
IOM2710:
180 x 127 x 58 mm (7-1/16 x 5 x 2-1/4 in.)
IOM 3710:
180 x 127 x 58 mm (7-1/16 x 5 x 2-1/4 in.)
Housing
Plastic housing
Plastic material: ABS + polycarbonate UL94 5VB
Protection: IP20 (IEC529)
Weight
IOM2710:
0.48 kg (1.1 lb)
IOM 3710:
0.55 kg (1.2 lb)
