Johnson Controls IFI-WS Скачать руководство пользователя страница 10

Страница: 10 / 75

Product Overview

Additional Software

IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014

1.2.2 System Limits

The IFI-WS is designed to operate within the limits listed below:

1.3 Additional Software

1.3.1 Anti-virus Software

Recommended and tested against McAfee Enterprise.

1.3.2 Windows Automatic Updates

Must be set to “Check for updates but let me choose whether to download and install them”.

1.4 Environmental Requirements

This product meets the following requirements for operation:

• Temperature - 0°C to 49°C (32°F - 120°F)

• Relative Humidity - 93 ±2% non-condensing at 32 ±2°C (90 ±3°F)

However, it is recommended that this product be installed in an environment with a normal room
temperature of 15-27º C (60-80º F).

Table 1.1 System Limits

Limit

Feature

Maximum Allowed

Physical Network Limit

Gateways

200 total

Logical Network & Screen

Screens

1000

Devices

100,000

Macros

100

Macro Button

100

NavIcons

1000

Monitoring Profiles

100

Node Control Profiles

100

Workstation

Output Formats

25 per Workstation

Email Recipients

10 per Workstation

Email Recipients (MNS)

5 per Event

Pager Recipients

10 per Workstation

Pager Recipients (MNS)

5 per Event

Maximum Workstations per
system

50 Workstations

User Manager

Users

500

Содержание IFI-WS












































































Результаты поиска

Содержание IFI-WS

Отзывы:

Johnson Controls IFI-WS, Инструкция по установке и эксплуатации, Страница: 10 / 75

Результаты поиска

Содержание IFI-WS

Отзывы: