Johnson Controls IFC-3030, Руководство по программированию

Страница: 37 / 156

IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 37
Point Program Program
The cursor will appear in the date fields, and may be moved using the keyboard arrow keys. Type to
add/edit any holiday dates.
SOFT KEYS
ANY YEAR:
Press to place asterisks in the YY section of the field. An asterisk denotes any year.
NEXT/PREVIOUS SELECTION:
Press to view the next or previous group of five holidays.
ACCEPT:
Press to save changes to the date fields and to return to the Panel Program Menu.
3.4 Point Program
The Point Program allows the programmer to enter/change point information for detectors,
modules, panel circuits, and general, releasing, logic and trouble zones.
Press the Point Programming Menu soft key of the Program/Alter Status Menu to display the
screen below.
Figure 3.23 Point Program Menu
Soft Keys
POINT SELECT:
Press until the desired point type appears. The types - detector, module, panel
circuit module, general zone, logic zone, trouble zone, or ACS Board - appear in the parenthesis
after the point formats. Enter the desired point address in the format field.
ACCEPT:
Press to progress to the appropriate screen, based on the type of point selected.
NEXT/PREVIOUS SELECTION:
Press to scroll backward or forward to the next or previously
installed point.
P O I N T P R O G R A M M E N U
P O I N T S E L E C T :
L y y D z z z ( D E T E C T O R )
N E X T P O I N T A C C E P T
P R E V I O U S P O I N T B A C K