FX-PCX17 and FX-PCX27 features graphic and table
Figure 3: FX-PCX17 and FX-PCX27 physical features
Table 1: FX-PCX17 and FX-PCX27 physical features
Callout
Physical feature: description and references
1
Device Address DIP Switch Block. See
information.
2
Mounting Clip
3
24 VAC, Class 2 Supply Power Terminal Block. See Table 5 for more information.
4
Cover Lift Tab. See
for more information.
5
Sensor Actuator (SA) Bus / Field Controller (FC) Bus Terminal Block. See Table 5 for
more information.
6
Binary Inputs (BIs) Terminal Block (Not available on FX-PCX17). See Table 3 for more
information.
7
Setting the End-of-Line (EOL) switch
for more
information.
Note:
The EOL Switch is located under the controller cover. You must remove the
cover to change the EOL switch position.
8
Sensor Actuator (SA) Bus or Field Controller (FC) Bus Port (RJ-12 6-pin Modular Jack).
See Table 5 for more information.
9
Light-Emitting Diode (LED) Status Indicators. See Table 7 for more information.
10
Universal Outputs (UO) Terminal Blocks (Not available on FX-PCX17). See Table 3 for
more information.
11
Universal Inputs (UI) Terminal Blocks (Not available on FX-PCX17). See Table 3 for more
information.
12
Relay Output Terminal Blocks (Not available on FX-PCX17). See Table 3 for more
information.
5
FX-PCX17 and FX-PCX27 Expansion Input/Output Module Installation Instructions
