Johnson Controls FMS-2000C Скачать руководство пользователя страница 59

Страница: 59 / 62

FMS-2000C

LIT-12013504

Use the quick link icons on the home screen to quickly access the isolation mode, cleaning mode, temperature, 360° Safety Halo, and

alarm mode.

Activating and deactivating the cleaning mode

1. On the home screen, tap the

Clean

icon to initiate the cleaning process. A

Start

and

Stop

icon appears.

2. Tap the

Start

icon to initiate the cleaning mode.

Optional:

If you want to stop the cleaning process before the timer runs out, tap the

Fan

icon. On the

WARNING!

screen, tap the

Checkmark

icon to confirm that you want to stop the cleaning process.

Note:

If you stop the cleaning process before its completion, the room cannot be cleaned sufficiently.

Adjusting the temperature within the comfort range

1. On the home screen, tap the

Temperature

icon.

2. To increase the temperature, tap the

icon.

3. To decrease the temperature, tap the

Down

icon.

4. To save the new settings, tap the

Checkmark

icon.

Adjusting the 360° Safety Halo and brightness

1. On the home screen, tap the

Halo

icon.

2. On the

Safety Halo

screen, switch

Enabled

on and expand it.

3. To adjust the brightness, move the slider to increase or decrease

Brightness

To confirm the new settings, tap the

Checkmark

icon.

Adjusting the nightly auto dim and dimmed period

1. On the home screen, tap the

Halo

icon.

2. On the

Safety Halo

screen, switch

Nightly Auto Dim

on and expand it.

3. To adjust how much the light of the 360° Safety Halo is dimmed, move the slider to increase or decrease the

Dimmed Level

4. To adjust the period of time in which you want to dim the light of the 360° Safety Halo, tap

Dimmed Period

and scroll to change the

start and end time.

To confirm the new settings, tap the

Checkmark

icon.

Adjusting the alarm mode quick links

1. On the home screen, tap the

Alarm

icon. A pop up appears and you can choose from the following alarm modes:

•

Audible Alarm

•

Muted Alarm

•

Night Mode

2. To change the setting, tap one of the alarm modes.

Adjusting the isolation mode quick link

1. On the home screen, tap the

Isolation Mode

quick link.

2. To change the isolation mode, tap

Positive

Negative

Neutral

To confirm the new settings, tap the

Checkmark

icon.

Quick links

Changing the occupancy state for the primary space

Changing the occupancy state for the monitored spaces can help save energy by reducing the temperature and air changes when the

room is unoccupied.

1. On the home screen, tap the

User Menu

icon.

2. On the

MENU

screen, tap

Room

3. On the

Primary

screen, expand

Occupancy

and tap

Unoccupied

To confirm the new occupancy settings, tap the

Checkmark

icon.

Adjusting the occupancy state for the secondary space

1. On the home screen, tap the

User Menu

icon.

2. On the

MENU

screen, tap

Room

3. To switch to the secondary monitored space, tap

Secondary

4. On the

Secondary

screen, expand

Occupancy

and tap

Unoccupied.

To confirm the new occupancy settings, tap the

Checkmark

icon.

Содержание FMS-2000C































































Результаты поиска

Содержание FMS-2000C

Отзывы:

Johnson Controls FMS-2000C, Руководство пользователя, Страница: 59 / 62

Результаты поиска

Содержание FMS-2000C

Отзывы: