manualshive.com logo in svg

Johnson Controls FMS-2000C, Руководство пользователя, Страница: 58 / 62

Поделиться
Скачать
Johnson Controls FMS-2000C Скачать руководство пользователя страница 58

FMS-2000C

LIT-12013504

58

Switching on and adjusting the brightness of the 360° Safety Halo

1.  On the home screen, tap the 

User Menu

 icon. 

2.  To adjust settings for the 

Safety Halo

, tap the 

Safety Halo Setup 

arrow.

3.  To turn the 360° Safety Halo on, switch 

Enabled

 on.

4.  To adjust the brightness, move the slider to increase or decrease 

Brightness

.

5. 

To confirm the new settings, tap the 

Checkmark 

icon.

Adjusting the 360° Safety Halo nightly auto dim and dimmed period

Change the nightly auto dim feature to reduce the brightness of the 360° Safety Halo to a specified percentage and determine the time 

period in which you want to dim the light of the 360° Safety Halo.

1.  On the home screen, tap 

User Menu

 icon. 

2.  To view the 

Nightly Auto Dim

 feature for the 360° Safety Halo, tap 

Safety Halo Setup

.

3.  Switch 

Nightly Auto Dim 

on and move the slider to increase or decrease the 

Dimmed Level

.

4.  To adjust the period of time in which you want to dim the light of the 360° Safety Halo, tap 

Dimmed Period

 and scroll to the 

preferred start and end time.

5. 

To confirm the new settings, tap the 

Checkmark 

icon.

Setting the night mode

You can mute the audible alarm during the night. The screen and 360° Safety Halo still flash red when the controller goes into alarm 

mode.

1.  On the home screen, tap the 

User Menu

 icon. 

2.  On the 

MENU 

screen, tap 

Alarm

.

3.  On the 

ALARM

 screen, the 

Night Mode

 arrow.

4.  To set up a time period for the 

Night Mode

, scroll to the preferred time under 

Start Time

 and 

End Time

.

5. 

To confirm your settings, tap the 

Checkmark

 icon.

Adjusting the temperature

If the FMS-2000C controller controls temperature, you can adjust the temperature for the monitored rooms within the set comfort range. 

If you need to adjust the temperature outside this range, consult your facility manager.

1.  On the home screen, tap the 

User Menu

 icon.

2.  On the 

MENU 

screen, tap 

Temperature

.

3. 

Optional: 

To access the 

TEMPERATURE

 screen quickly, tap the 

Temperature

 icon on the home screen.

4.  To adjust the temperature, tap the 

Up

 or 

Down

 arrow icon to increase or decrease the temperature.

5. 

To confirm the new temperature setting, tap the 

Checkmark

 icon.

Adjusting screen brightness

1.  On the home screen, tap the 

User Menu

 icon.

2.  On the 

MENU 

screen, tap 

Screen Brightness

.

3.  Move the slider to increase or decrease screen brightness.

4. 

To confirm the new screen brightness setting, tap the 

Checkmark

 icon. 

Changing the isolation mode for the primary space

You can change the isolation mode of the primary and secondary space if configured accordingly. What you see on screen depends on 

how the facility manager configured the device. You can choose from one of the following isolation modes:

• 

Positive and Neutral

• 

Negative and Neutral

• 

Positive, Negative and Neutral

 

To change the isolation mode, complete the following steps:

1.  On the home screen, tap the 

User Menu

 icon.

2. 

Optional:

 To change the isolation mode quickly, tap the isolation mode quick link on the 

Home

 screen.

3.  On the 

MENU 

screen, tap 

Room

.

4.  On the

 Primary

 screen, expand 

Isolation Mode

 and tap one of the available isolation modes.

5. 

To confirm the 

Isolation Mode

 settings, tap the 

Checkmark

 icon.

Changing the isolation mode for the secondary space

1.  On the home screen, tap the 

User Menu

 icon.

2. 

Optional:

 To change the isolation mode for the secondary space quickly, tap the isolation mode quick link on the 

Home

 screen.

3.  On the 

MENU 

screen, tap 

Room

.

4.  On the 

ROOM

 screen, tap Secondary.

5.  On the

 Secondary

 screen, expand 

Isolation Mode

 and tap one of the available isolation modes.

6. 

To confirm the 

Isolation Mode

 settings, tap the 

Checkmark

 icon.

Содержание FMS-2000C































































Отзывы:

Нет отзывов