Johnson Controls F4-SNC Скачать руководство пользователя страница 1

Страница: 1 / 26

F4-SNC Installation Guide

Application

The Facility Explorer SNC Series (F4-SNC) are Ethernet-

based, supervisory controllers that connect Building

Automation System (BAS) networks to IP networks.

The SNC features onboard inputs and outputs for

direct control of equipment. This device monitors and

controls networks of field-level building automation

devices, including HVAC equipment, lighting, security,

and fire safety equipment. The SNC has FIPS 140-2 Level

1 Compliance, which is a United States government

cybersecurity standard that approves cyroptographic

modules/algorithms used for encryption.
The F4-SNC25151-0H and F4-SNC25151-04H models have a

display where you can view Alarms, Overrides, Equipment

Data, and Trends. You can command Equipment Data

points. Display settings can be viewed and edited but

Controller settings can only be viewed. You can navigate

the display using the direction arrows, back, OK, and menu

buttons.
The F4-SNC25151-0x/x models have a total of 40 I/O points

- with 25 inputs and 15 outputs. The F4-SNC16121-0x

models have a total of 28 I/O points - with 16 inputs and

12 outputs. The first two numbers of the product code

number represent the number of inputs (SNC

151-0x/

x) and the next two numbers represent the number

of outputs (SNC25

1-0x/x). The SNC offers various

integration options.

Field Bus integrations supported

• BACnet MS/TP

Ethernet integrations supported

• BACnet/IP

Physical features

The following figures display the physical features of the

SNC25151-0x/x and SNC16121-0x with display models. The

accompanying table provides a description of the physical

features and a reference to further information where

relevant.

Note:

The physical features labelled with callouts

9-16 are only available on SNC models with the

display.

Figure 1: F4-SNC25151-0x/x

*241014302031A*

Part No. 24-10143-02031 Rev. A

2020-11-11

(barcode for factory use only)

F4-SNC25151-0xx, F4-SNC16121-0x

Содержание F4-SNC



























Результаты поиска

Содержание F4-SNC

Отзывы:

Похожие инструкции для F4-SNC

Бренды по названию

Популярные бренды

Johnson Controls F4-SNC, Руководство по установке

Результаты поиска

Содержание F4-SNC

Отзывы:

Похожие инструкции для F4-SNC

Бренды по названию

Популярные бренды