background image

24-10239-30 Rev. D

 

 

1-1

Chapter

 1 

This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2016 Johnson Controls, Inc.

I N T R O D U C T I O N

The CK722 Network Utility Tool (NUT) is a troubleshooting tool that allows you to restore 
functionality to the CK722 network controller in the event of device failure, and upgrade the 
controller’s operating system, by deleting the data from the unit and re-installing the 
controller’s operating system (OS) and firmware. Once you re-install the firmware and OS, 
the controller’s configuration settings will be re-initialized with the factory default settings. 
Downloading the CK722 object database from the P2000AE SCT returns the controller’s 
settings to their desired configuration.

This document describes how to use the Network Utility Tool (NUT) to install the CK722 
controller’s OS and firmware.

I

MPORTANT

The Network Utility Tool should only be used on new CK722 controllers, 
when the CK722 is unresponsive and requires drastic measures to get the 
unit up and running, or when you need to update the controller’s operating 
system. Do 

not

 use the Network Utility Tool to update the CK722 firmware 

if the unit is functioning properly and does not require an operating system 
update.

To update the firmware for a properly functioning controller, use the P2000 
Host software’s firmware update feature. Refer to the P2000AE Software 
User Manual for details.

Using the Network Utility Tool to install the CK722 OS and firmware can take 15 minutes, 
plus any setup and breakdown time.

N

OTES

If you remove power from the CK722 before the device has completed the 
initial reboot, the CK722 may either begin a new reboot sequence or require a 
new image update altogether.

The screen captures shown in this manual may differ slightly, depending on 
the software version you are using.

The terms 

P2000

 and 

P2000AE

 are used interchangeably throughout this 

manual.

Содержание CK722

































Отзывы: