Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 89 / 132

GSM
The GSM option group is to setup the GSM Module as
described below.
+
Every time an option in this group is download to
the Control Panel the Keypads will be locked for
the time required for the Control Panel to program
the GSM Module.
Present If this option is enabled, the options concern-
ing the GSM Module can be set.
Default: disabled.
+
The control panel can use the GSM Module ONLY
if this option is enabled.
If this option is enabled and the control panel fails to
communicate with the GSM Module for 30 seconds, the
event
GSM Absence occurs: the event ends when the
control panel succeeds in communicating with the GSM
Module.
Enabled If this option is disabled, the options concern-
ing the GSM Module (maintenance) can be uploaded or
downloaded.
Default: disabled.
+
The GSM Module may also be enabled/disabled
from the Installer Menu and the User Menu.
Black List If this option is enabled, the GSM Module
will accept ONLY calls coming from numbers in the
Phonebook with the
White List option enabled.
SIM Phone Number Type the telephone number of
the SIM card placed in the GSM Module (maximum 16
digits).
Roaming If enabled, the GSM Module connects to a
different operator when there is no coverage for the de-
fault SIM operator.
Speaker Volume Set the volume of the GSM Module’s
loudspeaker: this option determines the intensity of sig-
nals entering the GSM Module.
Microphone Volume Set the volume on the GSM
Module’s microphone: this option determines the inten-
sity of the signals outgoing from the GSM Module.
+
If the volume on the microphone is too high, it may
corrupt the DTMF tones produced by the control
panel, making them unrecognizable.
SMS Fault Text This option, together with the SMS
Fault Telephone Number option, allows the GSM
Module to send an SMS message independently when
it fails to communicate with the Motherboard.
Type the message to be sent to the telephone numbers
selected in the option
SMS Fault Telephone Number
when the GSM Module FAILS to communicate with the
Motherboard.
Valid entries: up to 255 characters.
Default: no text.
SMS Fault Tel Number Select the Phone Numbers in
the Phonebook to which the message typed in the op-
tion
SMS Fault Text should be sent.
n
Pay As You Go
+
The pre-paid SIM CARD credit management ser-
vice may be suspended at any time, at the discre-
tion of each individual GSM network operator.
This section can be used to send an SMS providing credit
balance information (supplied by the operator) to the first
number in the phonebook at regular intervals. Set the fol-
lowing options for a correct credit balance check request,
in accordance with the type of operator used.
+
Check with the SIM CARD operator for the meth-
ods and any charges for the available credit re-
quest.
Enquire Type Select the enquiry type ( SMS , Call ,
Service Command ).
Enquire Number Type the phone number to call or to
which an SMS message should be sent in order to re-
quest credit balance information.
Balance Message Type the string used to send SMS
messages and to make requests via service com-
mands.
Enquire Interval Set the time after which the GSM Mod-
ule should send a periodic SMS containing credit balance
information (if supported by your telephone operator).
Ø
Days : valid entries, 0 to 365.
Ø
Hours : valid entries, 0 to 23.
n
App/BOSS Cellular Communication
This subgroup is for setting the GPRS connection for
managing the control panel via the ABSOLUTA App
and for Teleservice via BOSS.
App/BOSS APN Enter the APN (Access Point Name)
supplied by the operator that provides the GPRS service.
Default: None.
+
Enter the correct APN for WAP/GPRS services or
some features may be limited (for more information,
please contact the operator of the service center).
+
The App/BOSS APN is the same as the Main Re-
ceiver APN .
App/BOSS Username If required, enter the Username
supplied by the operator that provides the GPRS service.
Default: None.
ABSOLUTA Plus PROGRAMMING FROM THE PC 89