Events and Actions
The
Events and Actions
options group determines
Control Panel operation as outlined below.
The left side of the window shows the categories of
events recognised by the Control Panel: enable the
Only Categories With Data
option to display ONLY the
categories that have at least one programmed action.
The centre of the window shows the events for the se-
lected category on the left-hand side of the window, and
shows the associated actions for each event: enable
the
Only Items with Data
option to display ONLY the
events that have at least one programmed action.
The table is displayed in a compact format; for each
event the following is displayed:
Ø
Nothing
, if the event is NOT associated with any ac-
tion or;
Ø
Outputs
, if the event activates at least one Output;
Ø
AS100
, if the event reproduces Voice Messages at
the Audio Station;
Ø
CALLS
, if the event sends Voice Messages;
Ø
SMS
, if the event sends SMS messages;
Ø
Central Station Event
, if the event is transmitted to
a Central Station.
Double click on the
[+]
symbol next to the action header
to display the options. Double click on the
[–]
symbol to
hide the options.
n
OUTPUTS ACTIVATION
This subgroup of options is there for setting Output acti-
vation by events: up to three outputs for each event can
be selected.
Enabled
If disabled (default), the event does NOT acti-
vate the outputs.
If ENABLED, when the event occurs, it activates the
outputs selected in the options
First Output
,
Second
Output
, and
Third Output
.
First Output\Second Output\Third Output
Select
the Outputs that the event must activate when it occurs:
you can set up to three outputs for each event.
+
A Bistable Output restore to standby status when
the event ends.
A Monostable Output restore to standby status
when its
ON Time
ends.
n
VOCAL ACTIONS/AS100 - CALLS
+
The communicator is disabled as long as there is a
PIN to default
fault, i.e., no communication action
is performed even if programmed (see “EN50136”
in “System Options > EN50131/EN50136”).
This subgroup of options is for setting the playing of
Voice Messages due to an event. Up to five Voice Mes-
sages can be associated with each event: the first two
are fixed and depend on the event, the other three can
be added for a more detailed description of the event.
The Voice Messages may be played by the loudspeaker
of the AS100 (see the
AS100
option) and/or sent to the
programmed telephone numbers (see the
Telephone
Enabled
and
Vocal Numbers
). options).
3
In order to comply with EN50131 Grade 3 stan-
dards, Voice Messages may NOT be used for
alarm notifications.
AS100
If disabled (default), the event DOES NOT play
the Voice Messages.
If ENABLED, the event plays the Voice Messages se-
lected in the options
First/Second Message
,
Third
Message, Fourth Message
and
Fifth Message
.
First/Second Message
Displays the word
AUTOMATIC
because the first message is always message no. 1
(
RESERVED - Panel Header
), whereas the second mes-
sage depends on event type, as outlined below (see the
Voice Message
options group):
Ø
Message no. 2 (
RESERVED - Alarm
) when an alarm
event is VERIFIED;
Ø
Message no. 3 (
RESERVED - Tamper
) when a tam-
per event is VERIFIED,
Ø
Message no. 4 (
RESERVED - Fault
) when a fault
event is VERIFIED,
Ø
Message no. 5 (
RESERVED - Restoral Alarm
)
when an alarm event ENDS,
Ø
Message no. 6 (
RESERVED - Restoral Tamper
)
when a tamper event ENDS,
Ø
Message no. 7 (
RESERVED - Restoral Fault
) when
a Fault Event ENDS,
Ø
Message no. 8 (
RESERVED - Generic
) when a ge-
neric event is VERIFIED.
Ø
Message no. 9 (
RESERVED - Restoral Generic
)
when a generic event ENDS;
+
The first message is ONLY reproduced via tele-
phone and NOT on the
AS100
.
Third Message, Fourth Message and Fifth Message
Select the Voice Messages that the event must play when
it occurs in addition to the first and second message.
+
Voice Messages for the event restore will be
played ONLY if the
Restore
option is enabled (see
later in this section).
ABSOLUTA Plus
PROGRAMMING FROM THE PC
67
Содержание Bentel Security tyco ABS128M50
Страница 14: ...14 Expandable Hybrid Control Panel...
Страница 98: ...98 Expandable Hybrid Control Panel...
