Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 102 / 132

View Bypass The keypad shows the Bypass if pres-
ent:
BYPASS! 001/003
Zone 001
Ø
the display top line shows the current bypass dis-
played respect to the total of bypass, on the right;
Ø
the display bottom line shows the label of the by-
passed zone.
16. Press ENTER to skip to “View Partition and System
status”.
Press
A to view the next bypass: if there are no
more bypasses to view, the display shows the Parti-
tion and System status.
View Partition and System status The keypad shows
the status of the partitions and the system:
Feb/04/11 14:32
DDDDDDDD
Ø
The display top line shows the date and time.
Ø
The display bottom line shows the state of the first 8
Partitions, on the left, as follow.
D : Disarmed.
A : Away Armed.
S : Stay Armed.
I : Instant Armed (Stay/Away with Zero Delay).
– : Not assigned to the Keypad.
Ø
The following information on the right.
Icon
Signalled
b
y
Description
S
x
Control panel tamper (opened or wall re-
moved)
T
x
System tamper ( AS terminal)
b
x
Peripheral tamper (keypad, key reader, ex-
pander IN/OUT, power station, transceiver)
f
x
False key
s
x
Peripheral lost (keypad, key reader, expander
IN/OUT, power station, tranceiver)
t
*
Installer access enabled (locally and re-
motely)
r
*
Answerphone facility enabled
i
Telephone line busy
17. Press ENTER to view the Option Menu.
INSTALLER
1act. 2prg 3view
18. Select the required option then go to the relative
paragraph: you can either select the required op-
tion group by pressing the relative key then scroll to
the required option by pressing the key
a and b , or
you can directly go to the required option by enter
its address as indicated following.
r
1 : actions
Ø
1.1 : Zone Test
Ø
1.2 : Output Test
Ø
1.3 : Changing the PIN
Ø
1.4 : Firmware Upgrade by an USB key
Ø
1.5 : Logger Downloading on a USB key
Ø
1.6 : Modify the LCD Keypad language
Ø
1.7 : Enabling Level 4 access
Ø
1.8 : Clear Faults and Tampers
Ø
1.9 : Option Programming by Keypad
r
2 : programming
Ø
2.1 : Voice Message Recording
Ø
2.2 : BPI Device enrolling
Ø
2.3 : Wireless Device enrolling
Ø
2.4 : Key (card/tag) enrolling
Ø
2.5 : Message Download/Upload via USB Key
Ø
2.6 : Option Download/Upload via USB Key
Ø
2.7 : Factory Default
Ø
2.8 : Telephone Communicator
Ø
2.9 : Key Disabling/Enabling
r
3 : view
Ø
3.1 : View Logger
Ø
3.2 : View the Firmware Version
Ø
3.3 : View Zone Status and Zone Bypassing
Ø
3.4 : View GSM Module Status
Ø
3.5 : View IP Module Status.
Quit from the Operations
Press ESC until the display shows the following mes-
sage (if you are on the Installer Level):
INSTALLER
Exit ?
or the following message (if you are on the Level 4):
LEVEL 4
Exit ?
Press ENTER to confirm.
+
The keypad quit from the operations even when
you do not press any key before the timeout ex-
pires: you have
30 seconds timeout when the key-
pad is displaying information about the system
(Alarms, Tampers, Faults, Bypass, Partitions and
Status) and
180 seconds when in the option
menu.
102 Expandable Hybrid Control Panel