O
N
26 DePuy Synthes User Manual Small Battery Drive II
Oscillating Saw Attachment (532.021)
Positioning the saw attachment
The attachment can be locked in eight different
positions (45° steps) when coupled: Lock the
machine, shove the sliding sleeve
N
toward the
saw blade coupling and rotate the attachment
into the desired position (Fig. 1).
Precaution:
To prevent injury, always grip the saw
attachment with the inserted saw blade from the
direction of the machine.
Changing the saw blade (Fig. 2)
1. Lock the machine.
2. Pull the locking knob
O
down and turn it
counterclockwise.
3. Lift and remove the saw blade.
4. Use a slight amount of pressure to insert the new
saw blade and turn it to the desired position. The
desired positions can be offset from each other at
45º angles.
5. Place your thumb on the saw blade coupling to hold
the saw blade and turn the locking mechanism
clockwise until the saw blade is fixed.
6. Unlock the power tool.
Precaution:
Saw blades labeled “Single Use” should
not be reused.
Attachments
Saw Attachments
Figure 2
Figure 1
Figure 3
Содержание DePuy Synthes Small Battery Drive II
Страница 2: ......
