Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 10 / 64

1
6
6 6
4
3
2
7
3
4
2
5
8
8 DePuy Synthes User Manual Small Battery Drive II
Small Battery Drive II
Handpiece
1
Attachment coupling
2 Trigger for speed regulation
3
Trigger for switching to reverse / oscillating drilling
4 Mode selector switch OFF (lock), Oscillating Mode
(forward/oscillating), ON (forward, reverse)
5 Battery pack (battery casing with inserted battery)
6
Release buttons for attachment
7 Release buttons for battery casing
8
Knob for the battery casing cover
Safety system
The Small Battery Drive II is equipped with a safety
system that prevents the machine from being
unintentionally started. To lock and unlock the tool, turn
the mode selector switch
4 to the appropriate setting on
the front plate of the handpiece: OFF, or ON position.
Protective systems
The Small Battery Drive II is equipped with three
protective systems:
•
A thermal overload safety system that shuts off the
tool if it becomes too hot during use. After cooling,
the tool can be used again.
•
An exhaustive discharge protection ensures that the
battery does not completely discharge. This protects
the battery and extends its life.
•
An internal fuse in the battery that blows in case of
unintended short cut. This prevents excessive heat, fire
or explosion. If this happens, the battery can not be
used anymore.
Speed and rotational direction control
Mode selector switch in the ON position
The bottom trigger
2
gradually increases and decreases
the forward/reverse speed. When the bottom and top
triggers
2
and
3
are pressed at the same time, the tool
immediately switches to reverse. When the bottom
trigger
2
is released, the tool immediately stops.