STEP 1 - Attaching J-Hook To Angle
Bracket
If your shelf is already in place, remove angle brackets and proceed with follow-
ing steps.
16IN. ANGLE BRACKET / J-HOOK ATTACHMENT
1. Measure 3in. back from front of angle bracket.
2. Mark 3in. location on bracket.
3. Align the J-hook at the mark.
4. Secure J-hook using #8 1in. screws
5. Repeat for remaining angle bracket.
PARTS LIST Lista De Piezas Liste Des Piéces
IMPORTANT: DO NOT RETURN TO STORE!
For missing or damaged parts, technical or assembly questions, please call John Louis Customer
Service at 1-800-480-6985
IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA!
Llame al servicio al cliente local de John Louis al 1-800-480-6985
para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.
IMPORTANT: NE PAS RENVOYER OU RAPPORTER AU MAGASIN
!
Si vous avez une question concernant l’assemblage, des piéces manquantes ou endommagées ou
un probléme technique, appelez le Service á la clientéle de John Louis au 1-800-480-6985.
6FT. BAR KIT ASSEMBLY INSTRUCTIONS
For use with JLH646 / JLH649
INSTRUCCIONES PARA EL ARMADO DEL JUEGO DE BARRAS DE 1.82M.
INSTRUCTIONS DE MONTAGE DU NÉCESSAIRE DE TRINGLES DE 1.82M
Quantity: 1
72 in. or 48 in. Metal Bar
Quantity: 2
J-Hook Hardware
Quantity: 2
Bar End Hardware
Quantity: 4
#8 1 in. screw
Quantity: 2
#6 1 1/4 Self Tapping Screw
12IN. ANGLE BRACKET / J-HOOK ATTACHMENT
1. Align J-hook flush with front of the angle bracket.
2. Secure J-hook using #8 1in. screws
3. Repeat for remaining angle bracket.
STEP 2 - Attaching Angle Bracket To
Wall
If your shelf was already in place, replace angle bracket at prior location. For
new bracket installation proceed with following steps.
1. Count over the number of slats for desired angle bracket position .
2. Place angle bracket into position
1
