John Lewis JLDWW 906, Инструкция по эксплуатации

Страница: 24 / 36

Cancelling a delay start
or a washing programme
in progress
• Simultaneously press and hold the two
Cancel buttons (B and C) until all the
programme lights illuminate.
• Cancelling a delay start will also cancel a
washing programme. You have to set the
washing programme again.
• If a new washing programme is to be
selected, check that there is detergent in
the detergent dispenser.
Interrupt a washing
programme in progress
• Open the appliance door, the programme
stops. Close the door, the programme
will start from the point at which it was
interrupted.
• Switch off the appliance. Switch on the
appliance, the programme will start from
the point at which it was interrupted.
End of the washing
programme
• The dishwasher will automatically stop.
• Zero appears in the digital display.
• The light for the programme just ended
remains illuminated.
1. Switch off the dishwasher.
2. Open the dishwasher door, leave it ajar
and wait a few minutes before removing
the dishes; this way they will be cooler
and the drying will be improved.
When the washing programme
has finished, it is recommended
that the dishwasher is
unplugged and the water tap
turned off.
Unloading the dishwasher
• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to
cool down before removing from the
appliance.
• Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless
steel will eventually become cooler than
the dishes.
24