Setting and starting a
programme
The Auto Off function
This function decreases energy consumption by
deactivating automatically the appliance when it
is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
Starting a programme
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode and the door is
closed.
2. Press
Programmes
again and again until the
indicator of the desired programme is on.
The display shows the programme duration.
3. Set the applicable options.
4. Press
Start
to start the programme.
• The indicator of the running phase is on.
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay start
1. Set a programme.
2. Press
Delay
again and again until the display
shows the desired delay time (from 1 to 24
hours).
3. Press
Start
to start the countdown.
• The delay indicator comes on to confirm
the start of the countdown.
• The countdown starts to decrease with
steps of 1 hour. Only the last hour
decreases with steps of 1 minute.
When the countdown is completed, the
programme starts and the indicator of the
running phase comes on. The delay indicator is
off.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration.
After closing the door, the appliance continues
from the point of interruption.
If the door is opened for more than
30 seconds during the drying
phase, the running programme
ends. It does not happen if the
door is opened by AirDry function.
Do not try to close the appliance
door within 2 minutes after AirDry
automatically opens it, as this may
cause damage to the appliance.
If, afterwards, the door is closed
for another 3 minutes, the running
programme ends.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to set
the programme and options again.
Press and hold simultaneously
Delay
and
Option
until the appliance is in programme selection mode.
Cancelling the programme
Press and hold simultaneously
Delay
and
Option
until the appliance is in programme selection mode.
Make sure that there is detergent in the
detergent dispenser before starting a new
programme.
End of the programme
When the programme is completed the display
shows 0:00.
All buttons are inactive except for the on/off
button.
1. Press the on/off button or wait for the Auto
Off function to automatically deactivate the
appliance.
If you open the door before the activation of
Auto Off, the appliance is automatically
deactivated.
2. Close the water tap.
Dishwasher User Manual
22
