Settings
Programme selection mode
and user mode
When the appliance is in programme selection
mode it is possible to set a programme and to
enter the user mode.
Settings available in the user mode:
• The level of water softener according to the
water hardness.
• Activation or deactivation of the rinse aid
empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
How to set the programme selection
mode
The appliance is in programme selection mode
when the programme indicator
Eco
is on and
the display shows the programme duration.
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Press and hold simultaneously
Delay
and
Option
until the appliance is in programme selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter the user mode, press and hold
simultaneously
Delay
and
Option
until the
indicators Eco, Auto and Intensive start flashing and
the display is blank.
The water softener
The water softener removes minerals from the
water supply, which would have a detrimental
effect on the washing results and on the
appliance.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise you
on the hardness of the water in your area. It is
important to set the right level of the water
softener to assure good washing results.
Water hardness
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke de-
grees
Water softener level
47 - 50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
Dishwasher User Manual
12
