Vivaldi
35
Quick Reference Guide
Switch on:
Switch on the organ with the on/off piston at the right, next to the manuals.
Wait several seconds. Starting the control functions and the settings will take some time.
The lamps of the on/off and 0 pistons light up and the settings appear on the display.
Overview of controls:
A:
Great stops
B:
Great stops and tremulant and couplers
C:
Midi Pedal/Great
D:
Display
E:
Midi Swell/Choir
F:
Main group intonations
G:
Subgroup intonations
H:
Rolltop cover lock
I:
Super Solos
J:
Swell stops
K:
Manual Swell
L:
Manual Great
AA:
Capture memory locations
BB:
SET/Enter
CC:
Volume control acoustics
DD:
Volume control organ
EE:
Pedal stops, couplers
M:
Manual choir
N:
On/off
O:
Swell stops, tremulant
P:
Choir stops, tremulant and coupler
Q:
0/reset piston
R:
MENU
S:
General Crescendo
T:
- and + pistons
U:
Transposer
V:
Chorus, Manual Bass
Cantus Firmus, Fix Accessories
W:
Reeds Off accessory
X:
0 and reset piston
Y:
Pre-programmed
memory locations
Z:
Sequence -, Se
Accessories:
Chorus (CH)
: Is a function for lightly detuning the organ stops to give it a broader and livelier
sound. Use the CH piston to activate the Chorus.
Fix Accessories (FA)
: This is a function for fixing accessories. As long as this piston is active,
the couplers and tremulants can only be switched on and off manually.
Reeds Off (RO)
: This is a function to switch off all reeds simultaneously. As long as this piston
is pressed, no reeds can be activated. When this function is switched off, the reeds that were on
are activated again. Use the RO piston to activate the Reeds Off function.
General Crescendo pedal (CR)
: This is a function for switching the General Crescendo pedal
on and off.
Change the registration:
The 0-piston cancels registration in two ways:
A short press on the 0-piston: Only the last change is cancelled.
A long press on the 0-piston: All registrations are cancelled.
Intonations:
The intonations are divided into a main group and a subgroup.
The main group consist of:
Romantic (ROM.)
Symphonic (SYM.)
Baroque (BAR.)
Historic (HIS.)
The subgroup consist of:
Classic
Solo (SOLO)
Hymn (HYMN.)
Select a main group by pressing the ROM, SYM, BAR or HIS piston.
Then select a subgroup by pressing the SOLO or HYMN piston.
If not subgroup is selected, Classic is selected automatically.
© 2009 Johannus Orgelbouw b.v.
