Johannus LiVE 2T-A, Руководство пользователя, Страница: 22 / 54

User Manual LiVE 2T-A / LiVE 3T-A (AGO) 23
4.6 Couplers
Manual coupler:
MANUAL II – MANUAL I (II-I):
Fully couples all keys of Manual II to Manual I.
Only for LiVE 3T-A:
MANUAL III – MANUAL II (III-II):
Fully couples all keys of Manual III to Manual II.
MANUAL III – MANUAL I (III-I):
Fully couples all keys of Manual III to Manual I.
Pedal couplers:
MANUAL I – PEDAL (I-P):
Fully couples all keys of Manual I to the Pedal.
MANUAL II – PEDAL (II-P):
Fully couples all keys of Manual II to the Pedal.
Only for LiVE 3T-A:
MANUAL III – PEDAL (III-P):
Fully couples all keys of Manual III to the Pedal.
The designation of the main registers vary from sample set, therefore the
couplers are indicated by roman numerals. The couplers are located next to the
stop switches. See § 3.2 Overview of Controls (table).
4.7 Accessories
Sequence (SEQ):
Sequence is a function to sequential selecting capture memory locations. See also
§ 4.9 Capture memory.
Sequence is a function to call up capture memory locations in a sequential
way. With active SEQ function the:
- Pressing a piston of the capture memory locations Pedal will select the
previous General memory location.
- Pressing a piston of the capture memory locations General will select the
next General memory location.
Note: while the sequence function is active, the normal function of the capture
memory locations pistons is disabled.
Tutti (T):
Tutti is a function to switch on the full organ registration with just one piston.
The function is reversible.
All Swells to Swell (S/S):
All Swells to Swell transforms the expression pedal for Manual II, to a swell pedal
for the whole organ. Activate the All Swells to Swell with the S/S-piston.