Johannus LiVE 2T-A, Руководство пользователя, Страница: 13 / 54

User Manual LiVE 2T-A / LiVE 3T-A (AGO) 14
2.1.2 Installation music desk
1. Remove the protection foils from both sides of the Plexiglas of the music
desk.
2. Turn the four supplied screws countersunk into the pre-drilled holes of the
Plexiglas by hand.
3. Place the music desk at the right position, with the screw points into the pre-
drilled holes of the music desk.
4. Firmly tighten the screws with a screw driver until the music desk is securely
fastened.
2.2 Switch on
On the right hand side bottom of the keybed, you
will find the on / off switch of the organ. Wait
several seconds. Starting the control functions and
the settings will take some time.
The lights of the SET-piston and the as standard
set functions light up. The settings appear on the
display.
The use of an electric screw driver is not recommended.
Utrecht, Bätz
Location Organ Console
───────────────────────────
Mem : 1 █
Trans : 0 █
Tune : 431Hz █
Temp : Original █
Cresc : Off II