JOHANNUS Classic 350
Quick Reference Guide
INSTALLATION MUSIC DESK
-
Turn the supplied screws countersunk into the music desk slat by hand, till the screws stick out 2mm.
- Place the music desk in the right position, with the screw points into the predrilled holes.
- Firmly tighten the screws with a screwdriver, until the music desk is securely fastened. The use of an electric
screwdriver is not recommended.
OVERVIEW OF CONTROLS
SWITCH ON
Switch on the organ with the on/off piston at the right, next to the manuals.
Wait several seconds. Starting the control functions and the settings will take some time.
The lights of the 0 piston and the as standard set functions lit up. The settings appear on the display.
ACCESSORIES
Chorus (CH):
Chorus is a function for lightly detuning the organ stops to give it a broader and livelier sound.
Reeds Off (RO):
Reeds Off is a function to switch off all reeds simultaneously.
All Swells to Swell (S/S):
All Swells to Swell transforms the swell pedal for the Swell to a swell pedal for the whole organ.
If no expression pedal is configured as a swell pedal for the Swell, the S/S piston cannot be activated.
Crescendo (CR):
Crescendo is a piston to activate the crescendo pedal.
If no expression pedal is configured as a crescendo pedal, the CR piston cannot be activated.
Manual Bass (MB):
The Manual Bass function couples the Pedal monophonic to the Great.
Cantus Firmus (CF):
The Cantus Firmus function couples the Swell monophonic to the Great.
Transposer (TRANS.):
The Transposer function shifts the pitch by half-tone increments (from -8 to +8). The set pitch can be read on the
display (Tr:..).
-
Press the TRANS. piston.
-
Use the - and + pistons to set the pitch.
-
Use the ENTER piston to save the change.
Recall/Cancel function (0):
The 0 piston cancels registration in two ways:
- A short press on the 0 piston: Only the last change is cancelled.
- A long press on the 0 piston: All registrations are cancelled.
Keyboard Transfer (KT):
Keyboard Transfer is a function to switch the manuals of the Choir and the Great.
JOHANNUS MENU (MENU)
In the Johannus Menu several functions of the organ can be set:
-
Press the MENU piston to activate the Johannus Menu on the display.
-
Navigating the menu is done with the - and + pistons.
-
Confirmation of a choice is done with the ENTER piston.
-
Cancel or step back in the menu is done with the MENU piston.
INTONATIONS
The organ has 12 intonations divided into four styles: Romantic (ROM), Symphonic (SYM), Baroque (BAR) and
Historic (HIS) and three variations per style: Standard, Solo (SOLO) and Trio (TRIO).
-
Select an intonation style by pressing the ROM, SYM, BAR or HIS piston
-
Select an intonation variation by pressing the SOLO or TRIO piston.
If no variation piston is selected, Standard is selected automatically.
PRE-PROGRAMMED MEMORY LOCATIONS
Pre-programmed memory locations are available by operating pistons PP to T and PL. These seven memory
locations have factory settings (presets) appropriate for the quiet pianissimo to the loud tutti and the classic
plenum.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T or PL). The active stops light up.
A
Pedal stops
B
Choir stops
C
Great stops
D
Swell stops
E
Volume control Organ
F
Volume control Cathedral
G
Phones connection
H
SET
I
Capture memory locations
J
CH: Chorus
K
Pre-programmed memory locations
L
RO: Reeds Off
M
S/S : All swells to Swell
N
CR: Crescendo
O
MB: Manual Bass
P
CF: Cantus Firmus
Q
TRANS.: Transposer
R
- and + pistons
S
ENTER
T
MENU
U
0: Recall / Cancel
V
Manual Choir
W
Manual Great
X
Manual Swell
Y
On/Off piston
Z
Display
AA
Four solo and orchestral voices
AB
Intonation styles
AC
Intonation variations
AD
KT: Keyboard Transfer
