Hoyer
®
Switch
7
Base
Removal
1.
Remove the frame as detailed in the ‘Frame Removal’ procedure.
2.
Remove the 4-off corner casters as detailed in the ‘Corner Casters Removal’ procedure.
3.
Remove the 2-off center wheels as detailed in the ‘Center Wheels Removal’ procedure.
4.
Remove the 2-off brake pedals and brake pads as detailed in the ‘Brake Pedal/Pad Removal’
procedure.
Replacement
NOTE:
Prior to re-assembly, it will be necessary to affix the base decals, ensuring they are correctly
located.
1.
Assemble the left and right brake pedal/pads to the base as detailed in the ‘Brake Pedal/Pad
Replacement’ procedure.
2.
Assemble the 2-off center wheels to the base as detailed in the ‘Center Wheels Replacement’
procedure.
3.
Assemble the 4-off corner casters to the base as detailed in the ‘Corner Caster Replacement’
procedure.
4.
Assemble the frame to the base as detailed in the ‘Frame Replacement’ procedure.
Knee Pad Sliding Section
Removal
1.
Remove the frame as detailed in the ‘Frame Removal’ procedure.
2.
Pull the 2-off knee pad positioning spring-loaded quick release pins outwards whilst simultaneously
pulling the knee pad sliding section off the frame.
Replacement
1. Correctly orientate the knee pad sliding section (pads facing away from the operator) and, while
pulling the 2-off spring-loaded quick release pins outwards, slide the knee pad section onto the frame.
2.
Assemble the frame to the base as detailed in the ‘Frame Replacement’ procedure.
Knee Pads
Removal
1.
Unscrew the 2-off M6 cap head knee pad retaining screws using a 5mm hex key.
2. The knee pads will now be free.
Replacement
1.
Align the 2 holes in the knee pad retaining bracket with the M6 threaded holes in the knee pad.
2.
Insert the 2-off M6 cap head knee pad retaining screws through the holes in the retaining bracket and
tighten to 10Nm using a 5mm hex key.
