26
•
CLEAN (
)
After pressing the
“
” button, start the motor and then start the water pump to pump water. In
this way, the cycle stops for 4 minutes.
•
ADD WATER (
)
Water shortage alarm: when the light is red, it means water shortage in the water tank. You need
to add water and press the
“
”
button to restart the machine.
Water shortage alarm:
If no water flow is detected during 5 seconds during pumping, the water
shortage icon is displayed and the machine stops working.
At the same time, start the water
discharge solenoid valve to discharge the externally connected water into the machine. If there is
no external water connection, the machine will shut down and enter the water shortage alarm
state 30 seconds later.
•
ICE FULL (
)
Ice full alarm. When the ice reaches the maximum amount of ice storage container, the
"
"
light
flashes and the machine stops. At this time, the ice needs to be poured out. When the ice position
is lower than the full sensor position, the machine will restart automatically.
OPERATION INSTRUCTIONS
•
Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed the MAX
position. If the water exceeds the maximum scale MAX, you need to open the bottom drain plug,
release the excess water, and cover with a transparent cover.
•
Step 2
Plug in the power and press the
“
”
button to start the machine.
•
Step 3
Select the size
(
)
of the ice you want to make, default big ice
