HOW TO CHANGE A CYLINDER
1. Turn off at the regulator and allow the heater to cool fully before removing and replacing the
cylinder. Do not attempt to replace the cylinder whilst the heater is still in use.
2. Cylinders must be replaced in a flame free environment.
3. Do not smoke while changing the cylinder
4. When you need to replace your empty cylinder, turn the gas off at the valve or regulator and
take the empty cylinder out of the heater.
5. Remove the regulator from the empty cylinder.
6. Follow the steps described under "Connecting the Cylinder", connect a new cylinder.
OPERATION GUIDE
Piezo ignition Maximum Medium Minimum
LIGHTING:
The heater can be regulated to three different heat intensities Maximum, Medium and Minimum
•
Press down and turn the control knob to Maximum and hold for 10 seconds.
•
Whilst still pressing down the control knob press the ignition button until the pilot light (at
the bottom of the burner) ignites. Continue to hold the control knob down for 10-15 seconds
more. Release the control knob until the stable flame is established. If the pilot flame goes
out, repeat the above operation
27
