DATA SHEET
For Receiving and Routing
Infrared Commands from
Any Remote Control
LCD/PLASMA-PROOF SURFACE MOUNT IR RECEIVER
IR-SMR MKII
Страница 1: ...DATA SHEET ForReceivingandRouting InfraredCommandsfrom AnyRemoteControl LCD PLASMA PROOF SURFACE MOUNT IR RECEIVER IR SMR MKII ...
Страница 2: ...0 304 8 cm of connecting wire included Reliable adhesive backing SPECIFICATIONS IR system Works with practically all brands of IR remote controls IR receiving varies by brand of remote control 20 35 609 6 cm 1066 8 cm range 60 degrees off axis operation WIRING REQUIREMENTS CAT 5 or better 10 304 8 cm 4 conductor wire is supplied MOUNTING Self adhesive surface mount DIMENSIONS 2 50 8 mm wide x 11 1...
Страница 3: ... cleaned and degreased before installation INSTALLATION 1 Determine a mounting location for the IR SMR MKII 2 Make sure the mounting surface is clean 3 Remove the protective coating from the self adhesive tape and attach the IR SMR MKII to the mounting surface 4 Run the IR SMR MKII cable Label the cable for future reference 5 Strip 1 4 6 4 mm of insulation from the end of each CAT5 wire 6 Locate t...
Страница 4: ......