5
POWER TOOL SAFETY
use tools for purposes not intended; do not
use circular saws to cut tree limbs or logs.
8. Dress correctly
.
Do not wear
loose clothing or jewellery; they can be
caught in moving parts. Rubber gloves
and non-slip footwear are recommended
when working outdoors. Wear a protective
hair covering to contain long hair.
9. Use safety accessories
.
Safety
glasses and ear defenders should always
be worn. A face or dust mask is also
required.
10. Connect dust extraction
equipment
.
If devices are provided for
the connection of dust extraction and
collection facilities, ensure that these are
connected and properly used.
11. Do not abuse the power cord.
Never carry the tool by the cord or yank it
to disconnect it from the socket. Keep the
cord away from heat, oil and sharp edges.
12. Secure the work piece
.
Use
clamps or a vice to hold the work piece. It
is safer than using your hand and it frees
both hands to operate the tool.
13. Do not over reach
.
Keep
proper footing and balanced at all times.
14. Maintain and Look after your
tools with care
.
Keep cutting tools
clean and sharp for better and safer
performance. Follow the instructions for
lubrication and accessory changes.
Inspect tool cords periodically and if
damaged have it repaired by an
authorized service facility. Inspect
extension cords periodically and replace,
if damaged. Keep tool handles dry, clean
and free from oil and grease.
15. Disconnect tools. Switch off
the power
.
Disconnect the plug from
the power point before servicing and when
changing accessories such as blades, bits
and cutters, and when the tool is not in
use.
16. Remove adjusting keys and
wrenches
.
Form the habit of checking
to see that the keys and adjusting
wrenches are removed from the tool
before switching the tool on.
17. Avoid unintentional starting
.
Ensure that the switch is in the OFF
position before plugging the tool to the
power supply. Do not carry a plugged in
tool with your finger on the switch.
18. Use
outdoor rated extension
cords
. When a tool is used outdoors, use
only extension cords that are intended for
outdoor use and are so marked.
19. Stay alert
.
Watch what you are
doing. Use common sense. Do not
operate a power tool when you are tired.
20. Check for damaged parts
.
Before using a tool, check that there are
no damaged parts, if a part is slightly
damaged carefully determine if it will
operate properly and perform its intended
function other wise replace. Check for
alignment of moving parts binding of
moving parts, breakage of parts, free
running of moving parts, proper
mounting and any other conditions that
may affect the operation of the tool. A
guard or other parts that are damaged
should be properly repaired or replaced by
an authorised service centre, unless
otherwise indicated in this instruction
manual. Defective switches must be
replaced by authorised service facility. Do
not use the tool if the switch does not turn
the tool on and off correctly.
21. Warning.
The use of any
accessory or attachment, other than those
recommended in this instruction manual,
may present a risk of personal injury.