INSTALLATION & USER GUIDE
JOBSITE SYSTEMS
12331 S.W. 130 STREET, MIAMI, FLORIDA 33186
P 866.4JB.SITE (866.452.7483) – F 305.238.0185
WWW.JOBSITESYSTEMS.COM
CONGRA
TULATIONS!
Thank you for choosing the
BT-SV S-Video
Balun T
ransformer
from JobSite. With
proper installation and operation, you’ll enjoy years of trouble free use.
JobSite manufacturers the industry’s most complete line of custom installation
components and
accessories for
audio/video systems.
To
see the
complete assortment,
visit our website at www.jobsitesystems.com.
INTRODUCTION
The BT-SV is a stand-alone device that transforms a single S-Video channel to and
from CAT-5 twisted pair cabling. It has two sets of simple connections. The fi
rst is an
S-Video connector for the S-Video signal. The second is a shielded CAT-5 connector
for the CAT-5 twisted pair connection. The circuitry is passive so there is no need for a
power supply.
The BT-SV allows an S-Video device such as a VCR or satellite receiver to be
located an extended distance from the system it is to be connected to. Doing so with
conventional video cabling is both expensive and prone to signal degradation. By using
a pair of these devices and a run of CAT-5 the problem can be solved inexpensively and
without signal loss and the introduction of noise. Additionally, in today’
s retrofit market
an installer cannot always successfully run a wire from point A to point B. There exists
however an abundance of twisted pair cabling in many homes. By using a pair of
these devices with an existing wire an installer may be able to complete a job that he
otherwise could not.
FEATURES
■
CAT-5 Connector
■
Gold Plated S-Video DIN Connector
■
Universal Mounting Holes
■
Ten-year limited warranty
SPECIFICA
TIONS
■
Overall dimensions: 4.75" W x .85" H x 2" D
■
Bandwidth:
Y: DC to 6 MHz
C: 1 MHz to 6 MHz
■
Transmission Distance: 500' (150 m) (CA
T-5 UTP)
CAT-5 BALUN TRANSFORMER
S-VIDEO
BT-SV
©2006 JobSite Systems. All rights reserved. JobSite, Pure Custom and Niles are registered trademarks of Niles Audio Corporation
and the JobSite Logo is a trademark of Niles Audio Corporation. All other trademarks are the property of their respective owners.
Some JobSite products (or components thereof) are manufactured under one or more U.S. Patents, foreign equivalents and/or
pending patents (see product for details). Because we constantly strive to improve our products, JobSite reserves the right to
change product specifications, descriptions, and prices without notice. The technical and other specifications of information
contained herein are not intended to set forth all technical and other specifications of JobSite products. Additional information can
be obtained at WWW.JOBSITESYSTEMS.COM or by calling JobSite at 866.452.7483. DS00527A
For Placing S-Video Devices Extended
Distances From Their Video Source
