Joab EcoDrive Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 73

Joab EcoDrive Скачать руководство пользователя страница 29

ton will stop all functions of the hook-lift immediately. To reset the emergency stop function, first
make sure the stop button is reset. Then restart the hydraulic pump.

Emergency Operation

Caution must be taken when using the emergency operating system. The hook-lift's
safety system is disengaged. There is a risk of damage to the hook-lift or injury if due
care is not taken. Before using the emergency override make sure that you are fully
aware of its operation.

It is possible to operate the hook-lift even though the hydraulic-lock is closed. Oper-
ating the hook-lift when the hydraulic-lock is closed can cause damage to the body.
Make sure to unlock the hydraulic-lock first, before performing: load, unload, and
shunting operations. The lock must be closed for tipping operations.

In the event of a failure in the hook-lift’s system,
it is possible to still operate the hook-lift using
the emergency system. To activate the emer-
gency system, follow the procedure listed
below:

If in any doubt about the use of the emergency
override, contact JOAB for advice before using
it.

1. Turn the hydraulic pump on.

2. Press and hold down the OK button for five

seconds, to open the

"Diagnostics and Stat-

page, as shown.

3. Press the down-arrow button so that the

spanner icon is selected on the left menu.

4. Press and hold down buttons F3 and F4, as shown, at the same time, for five seconds, so

that the text "

Fail Safe

" is displayed in the user interface.

NOTE:

once the text "

Fail Safe

" is displayed in the user interface, the emergency operation

will be active for five minutes only.

5. Press and hold down the OK button for five seconds to return to the main menu.

6. To operate a hook-lift function, press and hold down the function's icon for ten seconds.

EcoDrive Standard Functions

EcoDrive Hook-Lifts come equipped with a number of standard functions, as listed and
described below. In addition, it is also possible to order optional functions. For information
regarding optional functions, see

"EcoDrive Optional Functions", on page 24

.

21

Operation | EcoDrive Standard Functions

EcoDrive manual: 13300 Edition 1 | 2019-01-31

«
...
27
28
29
30
31
...
»

Содержание EcoDrive










































































Отзывы:

Нет отзывов