Joab EcoDrive VL10U, Руководство по эксплуатации и обслуживанию

Страница: 48 / 57

Service of the Skip-Loader
During normal operation, it is recommended
that the hydraulic oil is changed as follows:
l
Mineral oil – once every two years
l
Green oil – once every year
JOAB recommends that the oil is changed dur-
ing the autumn period.
Hydraulic oil type 32-cst/40 is recommended
for mineral oil.
If green oil is used for the system, always use the same type of oil and manufacturer of the oil.
The oil-filter must be changed after the first fifty hours of operation, then with every oil change.
The air-filter should be replaced at least once every two years, or more often, as required.
Service-Reminder Sticker
A JOAB service sticker is placed on the inside of the drivers door to
indicate when the skip-loader is due for its next service. In the
example shown opposite, the numbers around the outside represent
the months January to December.
As the month numbered 1 (January) is missing from the sticker, this
indicates that the next service is due during the month of January.
Make sure that the skip-loader is serviced in accordance with the
sticker.
Service Packets and Warranty
Service packets can be ordered from JOAB using the information provided below. Always
have the information provided on the hook-lift's manufacture plate ready before making con-
tact. Refer to
"Manufacture Plate", on page 4 .
Department Contact Details
Service workshop 031 7050 687
Spare Parts 031-7050 686
Technical Support 031-7050 688
Warranty 031-7050 717
Table 6: Service packets
42
Service and Maintenance | Service of the Skip-Loader
EcoDrive VL10-VL18 manual: 1021046 Edition 2 | 2022-05-02