Table 3. Physical Elements Panel Review
Table 4. Enclosure Information Box identifies the three sections below the
drives in the Physical Elements Panel. These three sub-sections are referred to as
the Enclosure Information Box.
Table 4. Enclosure Information Box
Element
Name
Description
Drive not configured
Drive is not configured; however, it
may be used as a member of an
Array Set, dedicated hot-spare, or
global hot-spare.
Configured & Normal Drive is a member on an Array Set
and normal.
Failed Drive
Drive is a failed member. Do not use
this drive.
Invalid Drive
Drive is Invalid, but marked with the
same symbol as failed. Do not use
this drive.
MARLIN
TM
4-9
M
MA
AR
RLLIIN
N
T
TM
M
16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B
Element
Name
Description
Enclosure
Information
This section provides the enclosure
number, the WWN, and the IP
address of the enclosure. The IP
address will only appear for the
main enclosure.
Controller
Information
This section tells whether the
enclosure is a main enclosure or a
sub-enclosure and whether the
system is a single or dual controller
system. The controller icon also
shows the health status of the
controller(s).
Status
Information
This section tells the health status of
each element: alarm, fan,
temperature, or power supply