(
A
)
(
B
)
(
C
)
(
D
)
(
E
)
High
Low
Off
(
F
)
(
G
)
(
H
)
(
I
)
Instructions
To fit batteries
(batteries are not included)
:
• Ensure power setting
(
A
)
is set to off
• Unscrew the top of Pedi Pro Deluxe®
(
B
)
• Remove battery lid by lifting the tabs
(
C
)
• Insert 4 new 1.5V AA batteries, carefully
matching the plus and minus signs
correctly
(
D
)
• Place battery lid back onto the unit and
screw back on
Instructions for first time use:
• Remove silver lid
(
E
)
• Peel off the blue protecting film
• To the side of the Pedi Pro Deluxe®, turn the tab to the first setting low
(
A
)
• Increase to the second setting once you are comfortable using Pedi Pro Deluxe
®
To change steel blade to buffing disc:
• Remove the silver lid
(
E
)
• Twist the pink protective plate clockwise on the Pedi Pro Deluxe® and remove
(
F
)
• Pull off the steel blade and shaving tray
(
G
)
to reveal the rotary head while taking care to not
accidently switch on (remove batteries first if necessary)
• Place the buffing disc onto the rotary head
• Re-attach the pink protective plate onto the Pedi Pro Deluxe® and lock by twisting
anti-clockwise
(
H
)
• Turn the Pedi Pro Deluxe® onto the first setting, then adjust settings accordingly
Cleaning and maintenance
• To wash the steel blade and empty out the waste, first remove the silver lid
• Twist the pink protective plate clockwise on the Pedi Pro Deluxe® and remove
(
F
)
• Pull off the steel blade and shaving tray
(
G
)
• Twist the blade cap anti-clockwise and lift away from the shaving tray, while taking care not to spill
any of the shavings held in the tray
• Dispose of the shavings and then wash with the blade in warm soapy water
• If needed, clean the buffing pad with a damp cloth. Take care not to get the exfoliating
pad wet
• Allow to dry completely before re-assembling
To replace buffing pad:
• Peel back the existing buffing pad carefully from the buffer head. Work your fingernail
under the pad to ease off
(
I
)
• Un-peel the white backing off the new buffing pad
• Stick carefully to the buffer head
• Place the buffing disc onto the unit as per the instructions above
