JLG TOUCAN 10E, Руководство по эксплуатации и безопасности, Страница: 66 / 130

SECTION 4 – MACHINE OPERATION
4-16 – JLG Lift – 31210088
Lifting
When lifting the machine:
- Platform must be fully lowered in the stowed position.
- Remove all loose items from the machine.
- Attach lifting straps/chains at BOTH lifting lugs as shown in
Figure 4-10.
Figure 4-10. Lifting the Machine
The machine may also be lifted using a fork truck:
- Fully lower the mast and the jib.
- Position the platform in line with the chassis with the jib over
the rear axle.
- Fork lift as shown in Figure 4-11.
VERIFY THE CAPACITY OF THE FORK TRUCK AND OF ITS EQUIPMENT.
FORK LIFT ONLY AT THE DESIGNATED POINTS.
WHEN DRIVING THE FORK TRUCK, KEEP THE WORK PLATFORM AS
NEAR TO THE GROUND AS POSSIBLE (BUT WITH A SUFFICIENT CLEAR-
ANCE FOR THE WHEELS NOT TO CONTACT THE GROUND).
Figure 4-11. Lifting the Machine Using a Fork Truck
4.12 TOWING
It is not recommended that this machine be towed, except in the
event of an emergency or a machine power failure.